Berger Copper C6 Drip Edge Flashing, 10 ft. Length

The Berger Copper C6 drip edge is a 10 ft. copper metal edging profile that directs water off the roof edge and away from the fascia. Sold as one 10 ft. piece, it is used along eaves and rakes in low-slope and steep-slope roofing details. Its natural copper finish weathers to a classic patina.

Key Features:

• Copper construction: Copper material delivers long-term corrosion resistance at the roof edge.
• 10 ft. lengths: Each piece is 10 ft. long for efficient coverage along roof edges.
• C6 profile: C6 drip edge profile designed for roof edge water control.
• Natural copper finish: Natural copper finish develops a traditional patina over time.
• Metal edging category: Part of Berger’s metal edging line for commercial roofing.

Specifications Table:

Coverage & How Much You Need:

Each 10 ft. piece covers 10 linear feet of roof edge. Measure the total eave and rake perimeter, divide by 10 and add 5-10% for laps and cuts.

Fit and Compatibility:

Used at roof edges with Berger metal edging details and standard roofing underlayment and membrane systems. Fasteners and any matching corner or termination pieces are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in the sell unit?
A: One 10 ft. length of Berger Copper C6 drip edge.

Q: How much do I need for my roof?
A: One piece per 10 linear feet of eave or rake edge, plus extra for laps and cut waste.

Q: Why choose copper over aluminum drip edge?
A: Copper offers superior long-term corrosion resistance and a premium appearance that weathers to a patina.

Q: Where is it installed?
A: Along roof edges at eaves and rakes, installed over the underlayment at eaves and per the roofing detail at rakes.

Q: Is this a commercial or residential product?
A: It is listed under commercial roofing metal edging, but copper drip edge is used in residential work as well.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Copper drip edge is the detail to choose when the edge will be visible or when longevity matters most, such as copper or slate roofing and premium residential work. Lap joints at least 2 in. in the direction of water flow and use copper or stainless fasteners to avoid dissimilar-metal corrosion. Order an extra piece or two for corners, which require careful cutting and bending.

Metal edging has sharp cut edges, so wear cut-resistant gloves and eye protection when handling and cutting.

Order Berger Copper C6 Drip Edge 10 ft. lengths for a premium, long-lasting roof edge.