Able Sheet Metal 10 ft. 28 ga. Steel Drip Edge, 1-1/2 in. x 2 in., 90, White

This Able Sheet Metal drip edge is 28 gauge galvanized steel formed in a 1-1/2 in. x 2 in. 90 profile with a kickout, painted white. Each piece is 10 ft. long and sold individually. Install it along eaves and rakes to direct water into the gutters.

Key Features:

• Water redirection: Helps redirect water from the fascia and into the gutters.
• 28 gauge steel: Formed from 28 gauge steel for durable edge flashing.
• 90 profile: 1-1/2 in. x 2 in. 90 profile with kickout.
• 10 ft. lengths: Standard 10 ft. pieces reduce joints along the eave.
• White finish: Painted white to complement trim and fascia.
• Galvanized base: Galvanized steel per ASTM A-653 for corrosion resistance.

Specifications Table:

Coverage & How Much You Need:

One piece covers 10 linear ft. of eave or rake. Plan pieces end to end with the profile lapped or butted per manufacturer instructions, and order enough 10 ft. lengths to match your total edge measurement.

Fit and Compatibility:

Works with standard residential and commercial shingle roofing and gutter systems. Able Sheet Metal offers the same profile in other colors and gauges; this listing is the white, 28 gauge, 1-1/2 in. x 2 in. x 10 ft. piece.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One 10 ft. piece of white 28 gauge steel drip edge in a 1-1/2 in. x 2 in. 90 profile.

Q: How much does one piece cover?
A: 10 linear ft. of roof edge; measure your total eave and rake length and order accordingly.

Q: What material is it?
A: Galvanized steel, with the family specified as ASTM A-653.

Q: What is the gauge?
A: 28 gauge.

Q: Can I get other colors?
A: The family is available in a variety of colors; this item is white.

Q: How is it installed?
A: Fasten along the eave and rake over the underlayment so water sheds into the gutter, following the manufacturer’s installation instructions and local code.

Expert Verdict Reviewed by the SuperArbor Pro Desk

On eaves, install drip edge over the underlayment at the eave and under it at the rake so water always runs over, not under, the metal. The 90 kickout profile helps route water off the fascia into the gutter. Use the same color family across all edge metal for a consistent trim line, and choose 28 gauge for standard residential work.

Metal edge flashing has sharp cut edges; wear gloves and eye protection when handling and cutting.

Order the Able Sheet Metal 10 ft. white 28 gauge steel drip edge for clean eave and rake protection.