Flamco 29-Gauge Galvanized Angle Flashing, 4 in x 4 in x 10 ft, Black

This Flamco angle flashing is a black-painted galvanized steel 90-degree corner flashing in 29 gauge, formed 4 in. x 4 in. in a 10 ft length. It covers wall-to-roof joints and other right-angle transitions on metal and shingle roofs. Sold per piece; bundles of 20 pieces.

Key Features:

• 90-degree angle: Formed at 90 degrees for wall-to-roof and other right-angle flashing details.
• Galvanized steel: Made of galvanized steel for durable weather protection.
• 29-gauge metal: 29-gauge metal is easy to field-form and cut.
• 4 in x 4 in legs: Equal 4 in. legs cover the wall and roof sides of the transition.
• 10 ft length: 10 ft length minimizes laps on long flashing runs.
• Black paint: Black factory finish blends with dark roofing materials.

Specifications Table:

Coverage & How Much You Need:

Each piece provides 10 ft of coverage along a 90-degree transition; divide the total flashing run in feet by 10 to size the order and allow for laps.

Fit and Compatibility:

Used with Flamco roofing trim and standard metal or shingle roof systems at wall-to-roof intersections; approved roof sealant and appropriate fasteners are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included with one order?
A: One 10 ft piece of black 29-gauge galvanized angle flashing; full bundles contain 20 pieces.

Q: What gauge is the metal?
A: 29-gauge galvanized steel.

Q: How do I install angle flashing?
A: Form and lap pieces along the transition, fasten per manufacturer instructions, and seal with an approved roof sealant.

Q: Will it rust?
A: The steel is galvanized for corrosion resistance, with a black painted finish on the exposed surface.

Q: Can it be cut to length?
A: Yes, it can be cut on site with tin snips or a metal shear.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Angle flashing is the workhorse detail piece for wall-to-roof transitions; match the color to the adjacent trim and keep laps shingle-style so water sheds. On metal roofs, allow for thermal movement per the panel manufacturer’s details. For longer runs, keep laps sealed and fastened on the upslope side.

Cut edges of galvanized flashing are sharp; wear cut-resistant gloves and eye protection when cutting and handling.

Order Flamco 29-gauge black angle flashing in 4 in. x 4 in. x 10 ft lengths for your roof-to-wall flashing details.