Henry 101 Non-Fibered Foundation Coating – 5 Gal. Cold-Applied Liquid Asphalt Damp Proofing

Henry 101 Non-Fibered Foundation Coating is a cold-applied, non-fibered liquid asphalt in a solvent system for damp proofing exterior concrete and masonry walls and foundations. It suits both commercial and residential foundations, above and below grade, and applies to surfaces that are thoroughly dry. One sell unit is a 5-gallon pail.

Key Features:

• Cold-applied formula: Applies cold in a solvent system with no heating required.
• Above & below grade: Ideal for damp proofing exterior concrete and masonry walls and foundations above and below grade.
• Weather-resistant film: Cures to a durable, weather-resistant film on the wall surface.
• Non-fibered asphalt: Non-fibered liquid asphalt formulation for standard damp proofing work.
• Commercial & residential: Recommended for both commercial and residential foundation applications.

Specifications Table:

Fit and Compatibility:

Use on exterior concrete and masonry foundation walls as part of a damp proofing system; it is not a waterproofing membrane and pairs with proper backfill and drainage detailing. Apply only to thoroughly dry surfaces.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One 5-gallon pail of Henry 101 Non-Fibered Foundation Coating.

Q: Where can this coating be used?
A: It is designed for damp proofing exterior concrete and masonry walls and foundations, both above and below grade.

Q: Does it need heating or mixing?
A: No, it is a cold-applied, solvent-based liquid asphalt that is ready to apply.

Q: Can it be applied to damp walls?
A: No, the manufacturer recommends applying it to walls and foundations that are thoroughly dry.

Q: Is this waterproofing?
A: It is a damp proofing coating that provides a durable, weather-resistant film; it is not specified as a waterproofing membrane.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Choose a non-fibered coating like Henry 101 when you need economical damp proofing on clean, dry concrete or masonry foundations; use a fibered product where extra body is needed. Apply to thoroughly dry surfaces and allow the film to cure before backfilling below grade. This is a damp proofing coating, not a waterproofing membrane, so pair it with perimeter drainage on wet sites.

Solvent-based asphalt coating: apply in a well-ventilated area, keep away from ignition sources, and follow the safety directions on the label.

Order Henry 101 Non-Fibered Foundation Coating in 5-gallon pails for your next foundation damp proofing job.