Milescraft PocketJig100 Compact Pocket Hole Jig | 0821324.

PocketJig100 pocket hole jig allows you to connect your workpieces in a quick and timely manner or do repairs around your house. Small, compact design allows you to do applications where a small jig is required. Built-in board thickness locations for easy measurement and set-up of your workpieces, virtually eliminating the need for manual measurements. Everything you need to get started with your first pocket holes!

PocketJig100 Designed To Make Repairs Simple

• No fenceand the small design allows you to get into some of the smallest places to make repairs to many joints

Hardened Steel 3/8 Drill Bushing

• For precise and accurate pocket holes every time using theMilescraft PocketBit
• Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try

Recessed Clamp Pocket with Magnet

• Helps to keep the clamp in the same position as you move to different locations
• With the stronger rare earth magnet, you can easily clamp the jig from one location to another
• For speed and accuracy, use theMilescraft 3 Face Clamp

Board Thickness Settings

• Four common board thickness settings built into the jig: 1/2, 3/4 1 and 1-1/2 (12, 19, 27, 38mm)

Convenient Built-in Depth Setting

• Easily set your bit for the correct drilling depth

3/8 Anti-Roll, Split Design Stop Collar

• The split design prevents slipping of the set screw when tightened and prevents the bit from rolling
• Includes hex key for tightening

3/8 HSS Step Drill Bit

• Made from high-speed steel the PocketBit with 1/4 hex shaft is designed to reduce clogging and provide smooth and precise holes

6 Magnetic T20 Star Driver

• For maximum torque settings without stripping
• Allows pocket screws to align with maximum precision

Includes:

• Single Barrel Pocket Hole Jig,
• 3/8″ (9.5mm) PocketBit,
• 3/8″ Stop Collar,
• 6″ Magnetic T20 Star Driver,
• Hex Key, Instruction Manual