Accent Building Materials Zinc Plated Modified Truss Screws, 1″ and 1-1/4″ #8, Box of Thousands

Accent Building Materials zinc plated modified truss screws are #8 fasteners with a low-profile modified truss head, supplied in bulk boxes for roofing and general construction. The line comes in two lengths: 1 in. (6,500 per box) and 1-1/4 in. (5,000 per box). Choose the 1-1/4 in. screw when fastening through thicker underlayment or sheathing layers.

Key Features:

• Zinc plated finish: Screws carry a zinc plated finish for corrosion resistance on interior and protected exterior applications.
• Modified truss head: The modified truss head provides a wide bearing surface that seats flush and reduces the risk of pulling through material.
• #8 gauge: Both lengths use a #8 gauge suited to general fastening in wood and light-gauge metal.
• Bulk box packaging: Each box holds 6,500 screws in the 1 in. size or 5,000 screws in the 1-1/4 in. size to cover full jobs without frequent reloading.
• Two length options: The line is available in 1 in. and 1-1/4 in. lengths so crews can match fastener length to the substrate stack.

Specifications Table:

Fit and Compatibility:

Use with #8-gauge-compatible drivers and standard drill or screw gun setups. Length choice depends on the material thickness being fastened; the 1-1/4 in. screw suits deeper penetration.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One box of zinc plated modified truss screws: 6,500 pcs of the 1 in. #8 size or 5,000 pcs of the 1-1/4 in. #8 size.

Q: Which size should I buy?
A: Pick the 1 in. screw for thin material and the 1-1/4 in. screw when you need extra embedment through thicker layers.

Q: What is a modified truss head used for?
A: Its wide, low-profile head spreads load over more surface, helping prevent fasteners from pulling through softer sheathing or underlayment.

Q: Are these screws corrosion resistant?
A: They are zinc plated, which provides corrosion resistance for typical construction use; for continuous exterior exposure a coated fastener may be preferred.

Q: What driver do I need?
A: Use a driver bit matched to the screw head recess; check the head before starting to confirm the bit fit.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Modified truss screws are a workhorse fastener for roof detail work, furring and general wood-to-wood fastening. Keep two lengths on hand so crews can adapt to variable substrates, and match your bit to the head recess to avoid cam-out. For fasteners that will be permanently exposed to weather, specify a coated or stainless option instead of zinc plate.

Wear eye protection and gloves when driving screws; points and edges are sharp and fasteners can eject if the bit slips.

Stock up on Accent Building Materials zinc plated modified truss screws in both lengths for your next roofing job.