Accuride 7950 Heavy-Duty Full Extension Ball-Bearing Drawer Slide, 12 in. to 36 in., 350 lb, Side Mount, Clear Zinc

The Accuride 7950 is a heavy-duty side-mount ball-bearing slide rated for 350 lb and full-extension travel, built for drawers up to 42 in. wide. Cold rolled steel rails in clear zinc are offered in lengths from 12 in. to 36 in., sold per pair in polybagged or bulk pack packaging. Use it for pot drawers, toolboxes and equipment storage.

Key Features:

• 350 lb Capacity: Rated for 350 lb, handling heavy pot drawers, tool storage and equipment.
• Full Extension: The full rail length extends so the entire drawer contents are accessible.
• Ball-Bearing Glide: Steel ball bearing mechanism with a bridged retainer keeps travel smooth and in sync.
• Thirteen Lengths: Available in 12 in. through 36 in. lengths in 2 in. increments.
• Non-Disconnect Design: Non-disconnect construction keeps the drawer permanently engaged.
• Wide Drawer Support: Engineered for drawers and shelves up to 42 in. wide.

Specifications Table:

Fit and Compatibility:

One pair serves one drawer in side-mount applications on metal or wooden cabinet frames. The non-disconnect design means the drawer cannot be lifted off without removing the slide from the cabinet.

Frequently Asked Questions (FAQ):

Q: How many slides do I get?
A: Slides are sold per pair, one left and one right rail for one drawer; bulk packs contain multiple pairs.

Q: What loads can it handle?
A: The 7950 is rated at 350 lb per pair, appropriate for pot drawers, toolboxes and equipment storage.

Q: How much side clearance does it need?
A: Allow 3/4 in. of side space per side, with 2.79 in. overall height and 3/4 in. width.

Q: Are the drawers removable?
A: No, the 7950 uses a non-disconnect design; the drawer stays attached to the slide.

Q: What screws should I use?
A: Fasten with 1/4 in. or #10 screws as specified for the slide.

Q: Which length fits my cabinet?
A: Match the slide length to your drawer depth; a 24 in. deep box typically uses a 22 in. or 24 in. slide.

Expert Verdict Reviewed by the SuperArbor Pro Desk

When a drawer will carry heavy cookware, tools or equipment, the 7950’s 350 lb rating and steel ball bearing build are the right choice over light-duty slides. Remember it needs 3/4 in. side clearance and is non-disconnect, so plan your installation sequence before mounting. Pick a slide length close to but not exceeding the drawer box depth for the best support.

A 350 lb slide pair can still be overloaded at the front of a wide drawer, so distribute weight and verify cabinet anchoring before loading.

Equip your heavy drawers with the Accuride 7950 350 lb full-extension slide pair.