ACM 5-1/4 In. Right Gutter End Cap, Aluminum

The ACM Right End Cap is a 5-1/4 in. gutter end cap for closing the right end of a gutter run. Each sell unit is one piece. It pairs with matching 5-1/4 in. gutter coil and the left end cap to complete gutter runs.

Key Features:

• Right-hand cap: Formed as a right end cap for closing the right end of a gutter.
• 5-1/4 in. size: Sized for 5-1/4 in. gutter profiles.
• Single piece: Sold as one piece per order unit.
• Seals run ends: Closes the open gutter end to keep water directed to the outlet.
• System match: Pairs with the matching left end cap and gutter coil.

Specifications Table:

Fit and Compatibility:

Fits 5-1/4 in. gutter formed from matching ACM gutter coil; use with the matching ACM left end cap on the opposite end. End caps must be sealed with gutter sealant (sold separately) for a watertight joint.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One right end cap sized for 5-1/4 in. gutter.

Q: Which end does this cap fit?
A: This is the right end cap; order the matching left end cap for the opposite end of the run.

Q: Do I need sealant?
A: Yes, apply gutter sealant at the joint per standard practice for a watertight installation.

Q: What gutter size does it match?
A: It is made for 5-1/4 in. gutter, matching the ACM gutter coil line.

Q: How is it attached?
A: It is crimped or snapped onto the gutter end and sealed, following standard gutter installation practice.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Order both right and left end caps for each straight run and check orientation before crimping. Seal the lap with gutter sealant and let it cure fully before testing water flow. Match the cap color and material to the gutter coil for a clean, uniform finish.

Wear gloves and eye protection when crimping end caps; metal edges can be sharp, and use stable ladder setup when working at height.

Order the ACM 5-1/4 in. right gutter end cap to finish your gutter run.