Award Metals 5 x 5 x 8 in. Step Shingle, 26 Gauge Black

This Award Metals step shingle measures 5 in. x 5 in. x 8 in. and is formed from 26 gauge steel in a black finish for roof-to-wall step flashing at shingle roofs. One piece is one sell unit. Order the number of pieces needed for the full wall-to-roof intersection.

Key Features:

• 26 gauge steel: Formed from 26 gauge steel for durable step flashing.
• Black finish: Black color blends with dark shingle and wall combinations.
• 5x5x8 profile: 5 in. x 5 in. x 8 in. bending suits standard step flashing laps.
• Roof-to-wall sealing: Sheds water at chimney, dormer and sidewall intersections.
• Piece pricing: Sold per piece so quantities match the job exactly.

Specifications Table:

Coverage & How Much You Need:

Each piece flashes one shingle course at a roof-to-wall intersection; estimate one piece per shingle course along the wall and add pieces for chimneys, dormers and skylight curbs.

Fit and Compatibility:

Use with asphalt shingle roofs where a black step flashing is appropriate; shingles, underlayment and sealant are sold separately.

Frequently Asked Questions (FAQ):

Q: What size is each step shingle?
A: Each piece is formed 5 in. x 5 in. x 8 in. from 26 gauge steel.

Q: What color does it come in?
A: This family is listed in black.

Q: How many pieces will I need?
A: Plan on roughly one piece per shingle course along each wall intersection, plus extras for chimneys and dormers.

Q: How is it installed?
A: It is woven in with each shingle course against the wall, then the vertical leg is lapped by the wall covering or counterflashing.

Q: Is it galvanized?
A: The sources list the material as 26 gauge steel in black; no additional coating detail is stated.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Step shingles are the classic way to flash sidewalls and chimneys on shingle roofs; the 5 in. x 5 in. x 8 in. bend gives enough up-wall and up-roof leg for most laps. Keep each piece lapped over the one below and seal the vertical leg where the wall covering does not counterflash. Choose a larger or heavier-gauge piece for long runs exposed to heavy runoff.

Sheet metal corners are sharp; wear cut-resistant gloves when handling and installing step flashing.

Order the Award Metals 5 x 5 x 8 in. 26 gauge black step shingle for clean roof-to-wall flashing.