Davinci Roofscapes 12″ Shake Hinged Hip & Ridge New Cedar Blend Composite Roofing

DaVinci Roofscapes 12-inch hinged hip and ridge cap in New Cedar Blend covers field tile at the roof’s hips, ridge or both. The hinged design conforms for a snug fit at the peaks, and each bundle covers 10 linear feet at a 12 in. exposure. Sold by the bundle.

Key Features:

• Hinged design: The hinged hip and ridge tile flexes to conform for a snug fit at the peaks.
• Covers hips or ridge: One unit covers the field tile at the roof’s hips or ridge or both.
• 12 in. exposure: Each bundle covers 10 linear feet at a 12 in. exposure.
• New Cedar Blend: Manufactured in New Cedar to match DaVinci standard roofing colors.
• Composite construction: Composite polymer accessory offers a finished look and enhanced lifetime performance.
• Industry recognized: Listed under CRRC and associated with NRCA, NAHB and U.S. Green Building Council membership.

Specifications Table:

Coverage & How Much You Need:

Each bundle covers 10 linear feet of hip or ridge at a 12 in. exposure. Measure total hip and ridge length, divide by 10, and allow extra for cuts and waste.

Fit and Compatibility:

Made for DaVinci Single-Width and Multi-Width Shake roofs; the hinged tile conforms over field tile at hips and ridges. Field shakes and starter tiles are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in a bundle?
A: A bundle of hinged hip and ridge units in New Cedar Blend covering 10 linear feet at a 12 in. exposure.

Q: How is the hinged design different?
A: The hinged tile conforms for a snug fit at the peaks and can cover field tile at hips, ridge or both.

Q: What exposure does it install at?
A: 12 in. exposure per the product listing.

Q: Which field tile does it match?
A: It is designed for DaVinci Single-Width and Multi-Width Shake installations in New Cedar.

Q: How many bundles do I need?
A: Divide your total measured hip and ridge length by 10 linear feet and add a waste allowance.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Choose the 12 in. hinged cap when your Shake layout uses a 12 in. ridge exposure; the hinge makes fitting irregular peaks easier than rigid two-piece caps. Order by measured hip and ridge footage with a waste allowance, and follow DaVinci’s installation instructions. Note this item lists 12 lb per bundle, lighter than the 6 in. 2-piece caps.

Ridge work occurs at roof peaks, so use appropriate fall protection and follow the manufacturer’s installation instructions and local building codes.

Order DaVinci Roofscapes 12″ Hinged Hip & Ridge in New Cedar Blend for a snug-fitting shake roof cap.