Elevate QuickSeam EcoWhite EPDM Splice Tape, 6 in. x 100 ft. Cure Tape for EcoWhite Membrane Panels

Elevate QuickSeam EcoWhite Splice Tape is a cure tape designed for field splicing EcoWhite EPDM membrane panels and flashing. This line is offered in 3 in., 5 in., and 6 in. x 100 ft. rolls; the item listed here is the 6 in. x 100 ft. EcoWhite roll, sold per carton.

Key Features:

• Field splice tape: Cure tape designed for field splicing of EcoWhite EPDM membrane panels and flashing.
• EcoWhite color: Supplied in reflective EcoWhite to match white EPDM membranes.
• Multiple widths: Available in 3 in. x 100 ft., 5 in. x 100 ft., and 6 in. x 100 ft. rolls.
• System matched: Part of the Elevate QuickSeam accessory line for EcoWhite EPDM systems.

Specifications Table:

Coverage & How Much You Need:

One 6 in. x 100 ft. roll provides 100 linear feet of 6-inch splice tape. Estimate rolls by the total linear footage of panel laps and flashing splices, adding waste for corners and seams.

Fit and Compatibility:

Designed for splicing Elevate EcoWhite EPDM membrane panels and flashing, and works within the QuickSeam accessory system. Membrane, primer, and rollers are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One carton containing a 6 in. x 100 ft. roll of QuickSeam EcoWhite splice tape.

Q: What sizes are available?
A: The line includes 3 in. x 100 ft., 5 in. x 100 ft., and 6 in. x 100 ft. rolls.

Q: Which membranes does it splice?
A: It is designed for field splicing Elevate EcoWhite EPDM membrane panels and flashing.

Q: Is it also for RubberGard?
A: Cure tape in this family is designed for splicing RubberGard and EcoWhite membrane panels per the manufacturer.

Q: How do I estimate rolls?
A: Total the linear feet of seams and splices and divide by 100, allowing extra for detail work and waste.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Use EcoWhite QuickSeam tape on white EPDM roofs where seam appearance and reflectivity matter, matching the tape width to the specified lap, commonly 6 in. on field seams. Scrub the splice fully with a QuickScrubber pad to ensure complete bond and follow Elevate’s temperature and priming requirements. On black RubberGard roofs, use the black QuickSeam tape instead.

Follow the membrane manufacturer’s seam-assembly instructions, temperature limits and safety guidance, including proper solvent use and roof-top fall protection.

Order Elevate QuickSeam EcoWhite EPDM splice tape, 6 in. x 100 ft., for clean white membrane splices.