Elevate UltraPly TPO QuickSeam RMA Strip 10 in. x 100 ft. White Membrane Attachment Strip

The Elevate UltraPly TPO QuickSeam RMA Strip is a 10 in. wide white UltraPly TPO membrane strip with two 3 in. wide factory-laminated tape strips along its length. It provides additional membrane securement beneath UltraPly TPO membranes. One 100 ft. roll is included per unit.

Key Features:

• Factory-laminated tape: Two 3 in. wide QuickSeam tape strips are factory laminated to the 10 in. TPO membrane strip.
• Added securement: Used beneath the membrane as additional membrane attachment per Elevate specifications.
• Easy release tape: Features easy-to-remove release tape for faster installation.
• 100 ft. roll: Supplied as a 10 in. x 100 ft. white roll.
• 24-month shelf life: Shelf life of 24 months when stored in the original container at 60 to 80 degrees F.
• UltraPly matched: Made from genuine UltraPly TPO membrane for system compatibility.

Specifications Table:

Coverage & How Much You Need:

One 100 ft. roll provides 100 linear feet of reinforced membrane attachment. Apply where Elevate specifications call for additional securement, such as at perimeter and field attachment zones.

Fit and Compatibility:

Designed for use beneath Elevate UltraPly TPO membranes per Elevate specifications and details. Do not use with UltraPly TPO XR membranes. Bonding primer and other system accessories sold separately.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One 10 in. x 100 ft. white QuickSeam RMA Strip roll with factory-laminated tape.

Q: How much does a roll cover?
A: One roll gives 100 linear feet of additional membrane securement.

Q: How should it be stored?
A: Store in the original container at 60 to 80 degrees F for a 24-month shelf life.

Q: Can I use it with TPO XR membranes?
A: No, the manufacturer states not to use it with UltraPly TPO XR membranes.

Q: How is it installed?
A: Remove the release tape and apply per Elevate specifications as additional securement beneath the membrane.

Expert Verdict Reviewed by the SuperArbor Pro Desk

RMA strips speed up attachment detailing because the tape is factory laminated, avoiding field-applied adhesive errors. Keep the release tape on until the substrate is prepped and position the strip in one pass, then roll it firmly for full bond. Verify your project specification allows RMA securement in the intended zones.

Follow Elevate specifications for substrate preparation and membrane attachment; use proper fall protection when working on low-slope roofs.

Order the Elevate UltraPly TPO QuickSeam RMA Strip for your next membrane attachment detail.