Elevate Water Based Bonding Adhesive P, Pink to Clear, 5 Gallon Pail

Elevate Water Based Bonding Adhesive P is a 5-gallon contact adhesive for bonding RubberGard EPDM, UltraPly TPO, and FormFlash membrane to acceptable substrates. It serves as a water-based alternative to Elevate solvent-based bonding adhesives. One gallon covers a nominal 100120 sq ft when coating both surfaces by roller.

Key Features:

• Water-based formula: A water-based alternative to Elevate solvent-based bonding adhesives.
• Broad membrane fit: Designed for RubberGard EPDM, UltraPly TPO, and FormFlash membrane products.
• Contact adhesive: Applied as a contact adhesive to bond membrane to acceptable substrates.
• Efficient coverage: Nominal coverage of 100120 ft per gallon coating both surfaces with roller application.
• One-year shelf life: One-year shelf life when stored in the original sealed container at 6080 F.
• Code-rated assemblies: Consult the Elevate Code Approval Guide for specific FM and UL rated assemblies.

Specifications Table:

Coverage & How Much You Need:

Nominal 100120 ft per gallon when coating both membrane and substrate surfaces by roller, depending on substrate. A 5-gallon pail covers roughly 500600 ft on that basis.

Fit and Compatibility:

Formulated for Elevate RubberGard EPDM, UltraPly TPO, and FormFlash membranes on acceptable substrates. Check the Elevate Code Approval Guide before using it in FM or UL rated assemblies.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One 5-gallon pail of Water Based Bonding Adhesive P in pink-to-clear formulation.

Q: How far does a pail go?
A: At the nominal rate of 100120 ft per gallon coating both surfaces, a 5-gallon pail covers approximately 500600 ft, depending on substrate.

Q: How should it be stored?
A: Store in the original sealed container at 6080 F for an expected shelf life of one year.

Q: Which membranes does it bond?
A: It is designed for RubberGard EPDM, UltraPly TPO, and FormFlash membrane products.

Q: Can I use it in FM or UL assemblies?
A: Consult the appropriate Elevate Code Approval Guide for specific FM and UL rated assemblies.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Apply to both membrane and substrate surfaces with a roller for proper contact adhesion, and respect the listed coverage rate to avoid starved joints. Choose the water-based version when solvent adhesive handling or VOC concerns are a factor on the site. Always confirm membrane-substrate compatibility with Elevate specifications before full production.

Consult the product safety data sheet and wear appropriate PPE; work in ventilated conditions and keep adhesive off skin and eyes.

Get Elevate Water Based Bonding Adhesive P in the 5-gallon pail for your next EPDM or TPO job.