FLAMCO Galvanized D-Style Drip Edge, 4-1/2 in., 30 ga.

FLAMCO galvanized D-style drip edge directs roof runoff into the gutter and away from the fascia. It installs over the roof edge and extends into the gutter, in 10 ft. lengths of 4-1/2 in. wide, 30-gauge galvanized metal. Sold per piece in Black, Brown, Light Stone or White.

Key Features:

• Directs runoff: Redirects water from the fascia and into the gutters.
• D-style profile: D-style eave drip installs over the roof edge and extends into the gutter.
• Galvanized metal: Galvanized steel construction for long outdoor service.
• 30-gauge: Formed from 30 gauge metal for the standard eave drip spec.
• 10 ft. lengths: Standard 10 ft. lengths reduce joints along the eave.
• Color options: Available in a variety of colors to complement any house.

Specifications Table:

Coverage & How Much You Need:

Each 10 ft. piece covers 10 linear feet of eave. Measure total roof edge length, divide by 10, and add a small allowance for laps at joints when sizing the job.

Fit and Compatibility:

Pairs with standard gutters and underlayment at the eave; choose a color that matches your gutter, fascia or shingle. Fasteners and gutter system sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One 4-1/2 in. x 10 ft. length of galvanized D-style drip edge per piece ordered.

Q: How much does one piece cover?
A: Each 10 ft. length covers 10 linear feet of roof eave.

Q: What colors are available?
A: Black, Brown, Light Stone and White.

Q: What gauge is it?
A: 30 gauge galvanized metal.

Q: How is drip edge installed?
A: It installs over the roof edge on top of the underlayment at the eave, with the D-profile lip extending into the gutter to direct runoff away from the fascia.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Install drip edge at the eaves over the underlayment and beneath at the rakes, lapping joints in the direction of water flow. Choose the color closest to your gutter or trim for the least visible edge. On long eaves, keep 10 ft. laps tight and fastened every 8 to 12 inches so wind cannot lift the edge.

Drip edge is sharp along the cut edges; wear gloves and eye protection when handling and cutting.

Order FLAMCO 4-1/2 in. 30-gauge galvanized D-style drip edge in your color to finish the eave.