Johns Manville .060 PVC SD Plus Membrane, 60 mil Gray, 10 ft x 100 ft Roll

This Johns Manville PVC SD Plus membrane is a 60 mil gray roll, 10 ft x 100 ft, a heat-weldable thermoplastic PVC for commercial low-slope roofing. It meets ASTM D 4434, Type III, with a non-wicking polyester scrim, patented aramid-reinforced fastening edge and inherent resistance to oils, fuels and grease. One roll per order.

Key Features:

• Heat-weldable PVC: Heat weldable thermoplastic PVC available in 50, 60 and 80 mil; this roll is 60 mil.
• ASTM Type III: Meets the requirements of ASTM D 4434, Type III.
• Non-wicking scrim: A non-wicking reinforced polyester scrim adds tensile strength; edge sealant is not required on cut edges.
• Aramid-reinforced edge: Patented aramid fiber is woven into the fastening side of all full rolls of PVC membrane.
• Chemical resistance: Inherently resistant to oils, air conditioning coolants, fuels and grease.

Specifications Table:

Coverage & How Much You Need:

One 10 ft x 100 ft roll covers about 1,000 sq ft nominal. Deduct for heat-welded laps and perimeter detailing when sizing the job.

Fit and Compatibility:

Part of the JM PVC SD Plus line with hot-air welded seams. Pair with JM PVC flashing, plates, fasteners and accessories sold separately.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One 60 mil gray PVC SD Plus roll, 10 ft x 100 ft.

Q: How much does one roll cover?
A: About 1,000 sq ft nominal before weld laps and perimeter details.

Q: How are seams made?
A: The membrane is heat weldable, so seams are hot-air welded.

Q: Do cut edges need sealant?
A: No, the non-wicking scrim makes edge sealant unnecessary on cut edges.

Q: Is gray available in other colors?
A: The PVC SD Plus line comes in White and Gray; this roll is Gray.

Q: Is it chemical resistant?
A: Yes, JM PVC is inherently resistant to oils, air conditioning coolants, fuels and grease.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Gray 60 mil PVC is a good middle option when reflectivity incentives do not apply but you still want weldable seams and chemical resistance. The aramid-reinforced fastening edge resists tear-out around plates and fasteners. For energy savings or code-required reflectivity, choose the white version instead.

Follow the manufacturer’s installation instructions and local building codes, and use proper fall protection when working on low-slope roofs.

Order the Johns Manville 60 mil gray PVC SD Plus membrane roll for a weldable, chemical-resistant roof.