Johns Manville 1.5 in. x 12 in. Tapered FESCO Edge Strip, 12-Piece Bundle

This Johns Manville Tapered FESCO Edge Strip is a 1.5 in. x 12 in. tapered insulation edge strip for commercial low-slope roofing. Each bundle contains 12 pieces providing 48 linear feet of coverage. It pairs with Johns Manville roofing insulation, cant strips, and membrane systems to ease membrane transitions at edges and curbs.

Key Features:

• Tapered profile: The 1.5 in. x 12 in. tapered profile creates a gradual transition from roof edge or curb to the field of the roof.
• Bundle coverage: Each 12-piece bundle delivers 48 linear feet of edge strip.
• Miami-Dade approved: The product is listed as Miami-Dade County Approved.
• Commercial grade: Designed for use in Johns Manville commercial roofing insulation assemblies.
• Manageable weight: The bundle weighs approximately 35 lb for easier handling on the roof.

Specifications Table:

Coverage & How Much You Need:

One bundle of 12 pieces yields 48 linear feet of tapered edge strip. Measure the linear footage of the edge, curb, or transition requiring the strip and divide by 48 to determine bundles needed.

Fit and Compatibility:

Part of the Johns Manville FESCO/cant strip family for use with JM commercial roofing insulation and membrane systems including TPO, PVC, EPDM, and BUR assemblies. Membrane, insulation, and attachment products are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One selling unit is a bundle of 12 edge strip pieces, 1.5 in. x 12 in. each, giving 48 linear feet total.

Q: How much area does one bundle cover?
A: Each bundle covers 48 linear feet of edge or transition detail.

Q: How many bundles do I need?
A: Measure the total linear footage of the edges or curbs where the strip will be installed and divide by 48.

Q: What approvals does this strip carry?
A: The item is listed as Miami-Dade County Approved.

Q: How is it installed?
A: Install per Johns Manville commercial roofing specifications, typically set in approved adhesive or attachment as required by the system specification.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Tapered FESCO edge strips are used to ease the membrane over a 90-degree edge, reducing stress at the perimeter and helping the system meet warranty details. Match the taper height to your insulation thickness at the edge so the membrane transition is smooth. Always follow the JM roof assembly specification and local code for attachment.

Wear gloves and eye protection when cutting and handling insulation edge strips, and follow roof fall-protection requirements during installation.

Order the Johns Manville 1.5 in. x 12 in. Tapered FESCO Edge Strip bundle for your next commercial roofing job.

Product Documents:

• Installation Guide (PDF)
• Product Data Sheet (PDF)
• Safety Data Sheet (PDF)