Johns Manville EPDM Peel & Stick Walkpad, Textured White, 30 in. x 30 in.

The JM EPDM Peel & Stick Walkpad is a 30 in x 30 in textured white solid rubber pad that creates a safe, stable, maintenance-free walkway to rooftop equipment in high-traffic areas. It installs without fasteners using three factory-applied rows of pressure-sensitive tape. Each order is one pad.

Key Features:

• Peel and stick: Three rows of 3 in factory-applied pressure-sensitive tape bond the pad to the membrane without mechanical fasteners.
• Heavy-duty rubber: Solid rubber pad construction stands up to rooftop foot traffic.
• Textured surface: Textured white EPDM surface provides a slip-resistant walking path.
• Rooftop access: Provides a safe, stable and maintenance-free walkway for quick and easy access to rooftop equipment.
• 30 x 30 pad: Each pad measures 30 in x 30 in for easy layout in walkway runs.

Specifications Table:

Coverage & How Much You Need:

One pad covers 30 in x 30 in (6.25 sq ft) of walkway. Lay pads end to end to build a continuous path to rooftop equipment, and space runs to match traffic routes across the roof.

Fit and Compatibility:

For use on JM EPDM single-ply membrane roofs; the pad’s peel-and-stick backing is part of the JM EPDM Peel & Stick product family. Pair with JM EPDM Tape Primer Plus Low-VOC where priming is required by the installation instructions.

Frequently Asked Questions (FAQ):

Q: What is included in one unit?
A: One 30 in x 30 in textured white walkpad with factory-applied tape; order one pad per position.

Q: How does it attach?
A: Three rows of 3 in wide pressure-sensitive tape are factory-applied; peel and press onto the prepared membrane.

Q: How thick is the pad?
A: The pad material is 0.250 in (6.35 mm) thick solid rubber; the overall pad is described as 3/8 in x 30 in x 30 in.

Q: Where should walkpads be placed?
A: Along traffic routes and around rooftop equipment in high-traffic areas to protect the membrane and provide stable footing.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Layout walkpad runs from the roof access point to each serviceable unit before peeling the tape backing, and clean the membrane so the tape bonds fully. On roofs with heavier service traffic, run a two-pad-wide path for comfortable two-way foot traffic. The white textured surface also reduces the visual footprint of access paths on light-colored membranes.

Ensure the membrane surface is clean and dry before applying, and confirm the walkway route with the building owner before adhering pads.

Order the JM EPDM Peel & Stick Walkpad to build safe rooftop walkways.