Knape & Vogt USC Heavy-Duty Bottom Mount Waste and Recycle Pullout, 35 or 50 qt, Soft-Close

The Knape & Vogt USC series heavy-duty pullout hides waste and recycling inside a base cabinet with undermount soft-close slides. Choose single or double polymer bins in 35 qt or 50 qt capacities, 11-13/16 in to 15-3/8 in wide, with white or platinum bins and a silver or white frame. Includes (6) mounting screws.

Key Features:

• Heavy-duty slides: Undermount soft-close slides carry the bins smoothly and quietly.
• Single or double bin: Single-bin units for waste, double-bin units to separate recycling.
• 35 or 50 qt bins: Polymer bins offered in 35 qt and 50 qt capacities.
• Multiple finishes: Silver frame with white or platinum bins, or white units.
• Bottom mount: Bottom/undermount mounting keeps the cabinet floor clear.
• Screws included: Includes (6) screws for installation.

Specifications Table:

Fit and Compatibility:

Fits standard base cabinets; the double 50 qt unit requires at least a 23-5/16 in H x 15-5/8 in W x 22-5/8 in D opening per the manufacturer. Verify opening size for the specific configuration before ordering.

Frequently Asked Questions (FAQ):

Q: What configurations are available?
A: Single or double bins in 35 qt or 50 qt capacities, with silver frames and white or platinum bins, or all-white units.

Q: What cabinet opening do I need?
A: The listed double 50 qt unit needs a 23-5/16 in H x 15-5/8 in W x 22-5/8 in D opening; measure your cabinet before ordering.

Q: Is it soft-close?
A: Yes, the pullout uses soft-close undermount slides.

Q: What is included?
A: The frame, bins and (6) mounting screws.

Q: Single or double bin?
A: Choose double bins to separate trash and recycling; single bin for waste only.

Q: How is it mounted?
A: Bottom/undermount mounting to the cabinet floor per the manufacturer description.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Measure the clear opening between face-frame stiles as well as depth past the door hinge, since the 50 qt double unit needs about 15-5/8 in of width. Bottom-mount undermount slides require a framed or solid floor mounting surface and careful screw placement to avoid the drawer box above. Pick the 35 qt heights (19-3/16 in H) when a half-depth drawer sits below the counter overhang.

Verify screw lengths so fasteners do not penetrate the cabinet floor or interfere with plumbing below the sink base.

Order the Knape & Vogt USC heavy-duty waste and recycle pullout in the size and finish for your kitchen.