MaxFelt 30 Synthetic Roofing Underlayment 48 in. x 250 ft Roll, White

MaxFelt 30 is a high-quality synthetic roofing underlayment supplied as one white 48 in. x 250 ft roll. Its anti-skid backside coating and enhanced spunbond non-woven surface give crews cooler working conditions and maximum traction, while providing a secondary weather protection layer beneath the roof covering.

Key Features:

• Anti-skid surface: Advanced anti-skid backside coating and an enhanced spunbond non-woven walking surface give maximum traction.
• Cooler on the roof: Provides cooler working conditions for roofing crews.
• Lays flat: Lays flat for fast, easy application.
• Mold resistant: Impervious to mold growth.
• Secondary protection: Serves as a secondary weather protection layer under the roof covering.
• ASTM performance: Meets or exceeds performance criteria for ASTM D226 types I and II.
• Flexible sizing: Available in 5 and 10 square rolls.

Specifications Table:

Coverage & How Much You Need:

One 48 in. x 250 ft roll covers about 10 squares (roughly 1,000 sq ft) of roof before lap deductions. Allow for side and end laps per the roof covering manufacturer and local code; a 5 square roll option is available for smaller jobs.

Fit and Compatibility:

Used as a secondary weather layer beneath asphalt shingles and other roof coverings; fasten with plastic cap nails or staples. Suitable for both new construction and re-roofing under most steep-slope systems.

Frequently Asked Questions (FAQ):

Q: What is included in the sell unit?
A: One white 48 in. x 250 ft synthetic underlayment roll.

Q: How much does one roll cover?
A: About 10 squares (roughly 1,000 sq ft) before allowing for laps; 5 square rolls are also available.

Q: How is it fastened?
A: Fasten with plastic cap nails or staples.

Q: Is it slippery to walk on?
A: No, it has an advanced anti-skid backside coating and an enhanced spunbond walking surface for maximum traction.

Q: Will it grow mold?
A: No, the material is impervious to mold growth.

Q: Does it meet code standards?
A: It meets or exceeds performance criteria for ASTM D226 types I and II.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Synthetic underlayment like MaxFelt 30 replaces heavy felt, laying flat and staying walkable in heat. Roll it with the printed side out, maintain code-required laps, and use plastic cap fasteners rather than bare staples on exposed exposures. Order 5-square rolls for steep or small roofs where a 10-square roll is awkward to handle.

Synthetic underlayment can be slippery when wet or dusty; wear fall protection and non-slip footwear when walking on rolls.

Order MaxFelt 30 synthetic underlayment rolls for cooler, safer installations and proven weather protection.