MuleHide Helix Max Low-Rise Adhesive Tank Part A and Part B, White, Box

MuleHide Helix Max Low-Rise Adhesive tank components are the two-part supply for low-rise, two-component adhesive applications on single-ply membrane roofs. Each tank, Part A and Part B, is sold separately as its own box in white. Use them with Helix low-rise dispensing equipment to bond insulation and cover boards to the roof deck.

Key Features:

• Two-part system: Sold as separate Part A and Part B tank boxes that mix during application to form the low-rise adhesive.
• Low-rise chemistry: Low-rise two-component adhesive designed for adhering insulation and substrate boards in single-ply roofing.
• White color: Both tank components are supplied in white.
• Box sell unit: Each part ships as one box, so order Part A and Part B to complete a set.
• Single-ply compatible: Listed under single-ply accessories for use with low-slope membrane roof systems.

Specifications Table:

Coverage & How Much You Need:

Coverage depends on bead spacing, board type and deck; size your order based on the application rate of the low-rise dispensing unit and the number of boards being set. One full set requires one Part A box and one Part B box.

Fit and Compatibility:

Intended for use with Helix/MuleHide low-rise adhesive tanks and dispensing equipment on single-ply low-slope roof assemblies. Part A and Part B must be used together as a matched set; mixing brands or partial sets is not recommended.

Frequently Asked Questions (FAQ):

Q: What is included with my order?
A: Each order unit is one box containing one tank, either Part A or Part B. A working set requires one of each.

Q: Do I need both parts?
A: Yes, Helix Max Low-Rise Adhesive is a two-component system and will not cure properly unless Part A and Part B are mixed in the application equipment.

Q: How much roof will a set cover?
A: Coverage varies with bead pattern and board type, so plan quantity using the dispensing unit’s stated application rate and your total insulation square footage.

Q: What equipment does it work with?
A: It is designed for low-rise two-component tank and dispensing systems used to adhere insulation and cover boards on single-ply membrane roofs.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Two-component low-rise adhesives are the standard choice for adhering polyiso, EPS and cover board on large commercial single-ply tear-offs because they eliminate hot asphalt kettles and fastener punctures through the membrane. Order Part A and Part B together and have the dispensing unit checked before mobilizing. Match the bead pattern to the wind-uplift requirements for your project rather than defaulting to a spacing.

Two-component chemical adhesives require appropriate PPE, ventilation and a working knowledge of the dispensing equipment before use on the roof.

Order Helix Max Low-Rise Adhesive Part A and Part B to keep your insulation-attachment production moving.