Rev-A-Shelf 449 BLUMOTION Natural Maple Base Cabinet Pull-Out, 110 lb Capacity, Multiple Widths

The Rev-A-Shelf 449 series is a natural maple base cabinet pull-out with BLUMOTION soft-close full-extension TANDEM slides and door-mounting hardware included. Four variants span 6-1/4 in to 10-1/2 in wide, 21-3/4 in deep and about 25-1/4 to 25-19/32 in tall, in 2-compartment or 4-compartment layouts for 12 in face-frame full-height base cabinets.

Key Features:

• Soft-close operation: BLUMOTION soft-close, full-extension TANDEM slides glide the unit fully out and close it gently.
• 110 lb capacity: Rated for a 110 lb load on the 4-compartment configuration.
• Four size choices: Widths of 6-1/4, 7-1/2, 9-1/4 and 10-1/2 in to match different base cabinet openings.
• Natural maple finish: Natural maple wood with a semi-gloss finish suits most cabinet interiors.
• Hardware included: Door mounting hardware is included with every unit.
• Flexible mounting: Mounts to the cabinet floor and side wall.

Specifications Table:

Fit and Compatibility:

Made for 12 in face-frame full-height base cabinets; the printed 8-1/2 in minimum opening corresponds to the 9-1/4 in wide unit. The matching 449KB and 449UT utensil versions share the same platform. Door mounting hardware is included.

Frequently Asked Questions (FAQ):

Q: What cabinet does this fit?
A: The series is designed for 12 in face-frame full-height base cabinets; the 4-compartment 9-1/4 in unit lists a minimum opening of 26 in H x 8-1/2 in W x 22 in D (face frame) or 22-3/4 in D (inset).

Q: Which width should I choose?
A: Choose from 6-1/4, 7-1/2, 9-1/4 or 10-1/2 in wide units based on your clear opening width; the 6-1/4 and 9-1/4 in units are 4-compartment and the 7-1/2 and 10-1/2 in units are 2-compartment.

Q: How much weight can it hold?
A: The listed 4-compartment configuration is rated for a 110 lb load.

Q: What is included?
A: Each unit includes the maple pull-out and door mounting hardware.

Q: Does it slide out fully?
A: Yes, the full-extension TANDEM slides with BLUMOTION soft-close let the unit travel completely out.

Q: Is it easy to install?
A: It mounts to the cabinet floor and side wall with included door-mounting hardware; two people make alignment easier.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Always measure the clear opening between face-frame stiles, the depth from door to back wall, and the height under any hinges before selecting a width. For inset doors, note the deeper 22-3/4 in opening requirement. I recommend the soft-close TANDEM slides in busy kitchens and pairing this with matching 449-series utensil or KB units for a consistent maple interior look.

Fasten the unit to the cabinet floor and side wall before loading, and do not exceed the rated load when the pull-out is extended.

Order the Rev-A-Shelf 449 BLUMOTION maple base pull-out in the width that fits your cabinet.