Sugatsune 2650 Round Bar Pull, 192 mm CC, 256 mm L, 304 Stainless Steel, Satin

The Sugatsune 2650 is a contemporary round bar pull in satin 304 stainless steel with a 192 mm center-to-center hole spacing. It measures 256 mm long x 14 mm wide with 35 mm projection and uses M4 x 25 screws. One pull per unit; packaged 25 per box.

Key Features:

• Contemporary style: Round bar profile in a contemporary style suits modern cabinetry.
• 304 stainless: Made of 304 stainless steel with a satin finish for durability and corrosion resistance.
• 192 mm spacing: 192 mm center-to-center drilling must match existing drawer or door holes.
• Slim profile: 256 mm L x 14 mm W bar with 35 mm projection for comfortable grip.
• Screws specified: Uses M4 x 25 mounting screws per the manufacturer listing.

Specifications Table:

Fit and Compatibility:

Requires cabinet doors or drawers drilled at 192 mm center-to-center; if converting from another spacing, existing holes must be filled or a new drilling made. M4 x 25 screws are the specified mounting hardware. Pair with other Sugatsune 2650 series pieces for consistent finish across a kitchen.

Frequently Asked Questions (FAQ):

Q: What does 192 mm CC mean?
A: CC is center-to-center, the distance between the two mounting screw holes, and it must match the holes in your drawer or door.

Q: What is included with one pull?
A: One bar pull; mounting uses M4 x 25 screws as specified by the manufacturer, and packaging quantity is 25 per box.

Q: What are the pull’s dimensions?
A: 256 mm overall length, 14 mm width, 35 mm projection, with 192 mm hole spacing.

Q: What material and finish is it?
A: 304 stainless steel in a satin finish.

Q: Can I use this on both doors and drawers?
A: Yes, as long as the mounting surface is drilled at 192 mm CC; install with the two provided spec screws through the back of the drawer front or door.

Q: Will it rust in a kitchen?
A: 304 stainless steel is corrosion resistant and well suited to kitchen environments.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Before ordering, measure your existing hole spacing rather than overall pull length; a 192 mm CC pull will not cover 160 mm or 128 mm drillings without redrilling. The 35 mm projection gives comfortable finger clearance on drawers while staying slim on door fronts. Satin 304 stainless hides fingerprints well and pairs cleanly with stainless appliances.

Tighten M4 screws snugly but do not overtighten into thin drawer fronts, which can strip the threads.

Order the Sugatsune 2650 satin stainless bar pull for a clean contemporary finish on your cabinets.