Titebond Melamine Glue.

Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals. It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials. Titebond Melamine Glue is a water-based adhesive that is nonflammable, has low odor, dries clear and cleans up with water. Its thicker formulation offers fewer runs and drips, making it easier to use and more effective for precise assemblies.

List Available Sizes & SDS

Get Literature

Features & Benefits:

• Bonds melamine, vinyl coated products, and HPL to porous materials
• Thicker formulation – fewer runs and drips
• Fast setting – Excellent strength
• Dries clear
• Long open time
• Fast initial tack

Application Guidelines:

Application Temperature: Above 40F (4C)
Open Assembly Time: 5 minutes (70 F./50%RH)
Total Assembly Time: 10-15 minutes (70F./50%RH)
Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations:

Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 40F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.

Physical Properties:

Type: Specialized vinyl acetate emulsion
Calculated VOC: 77 g/L
State: Liquid
Weight Per Gallon: 8.6 lbs .
Color: White
Dried Film: Clear
Flashpoint: > 200F
Solids: 57%
Freeze / Thaw Stability: Unstable
Viscosity: 12,000 cps
pH: 4.0
Chalk Temperature: To assure a good bond, 40F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life: 24 months in tightly closed containers at 75F

Caution Statement:

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Please Note: Kindly be aware that the images serve solely for illustrative purposes; the items included in the delivery are specified in the product content/description or as indicated by the product title.