TRI-BUILT 1.00″2.00″ Tapered ISO Rigid Roof Insulation Panel, 4 ft. x 4 ft.

This TRI-BUILT tapered polyiso roof insulation panel measures 4 ft. x 4 ft. and tapers from 1.00 in. to 2.00 in. thick to build slope into low-slope roof assemblies. Sold individually per panel. Combine it with other taper thickness classes to complete a continuous drainage layout.

Key Features:

• Tapered Profile: Tapers from 1.00 in. to 2.00 in. to direct water toward drains and scuppers.
• Rigid Polyiso: Rigid ISO foam panel provides roof insulation for low-slope membranes.
• 4 ft. x 4 ft. Panel: Square 4 ft. x 4 ft. format is easy to stage and position on the roof.
• G Taper Class: The 1.002.00 in. thickness class fits standard tapered-system layouts.
• Sold Per Piece: Order exactly the number of panels your sloped layout calls for.

Specifications Table:

Coverage & How Much You Need:

One 4 ft. x 4 ft. panel covers 16 sq ft of roof area. Estimate panel quantities by dividing the tapered field area by 16 sq ft and following the layout’s thickness plan.

Fit and Compatibility:

Intended for low-slope roof systems; use with other TRI-BUILT tapered ISO thickness classes and a compatible membrane, with adhesives or fasteners purchased separately.

Frequently Asked Questions (FAQ):

Q: What comes in the sell unit?
A: A single 4 ft. x 4 ft. tapered ISO panel tapering from 1.00 in. to 2.00 in. thick.

Q: How much roof does one panel cover?
A: 16 sq ft; divide the sloped field area by 16 to estimate the number of panels needed.

Q: Where is this taper class used?
A: The 1.002.00 in. class typically sits in the field or at the start of a slope run, per the tapered layout drawing.

Q: How is it attached?
A: Install per the roof system manufacturer’s instructions using approved insulation adhesives or mechanical fasteners, sold separately.

Q: Can it stay exposed?
A: No, the panel must be covered by the roof membrane; protect it from moisture until then.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Start tapered runs at the low point with thinner classes like this 1.002.00 in. panel and step up through the thicker classes toward the high point. Keep the taper direction consistent across rows so drainage paths stay uninterrupted. Verify panel attachment with the membrane manufacturer’s requirements.

Practice safe lifting and roof work; use fall protection when installing insulation on any roof.

Get TRI-BUILT 1.002.00 in. tapered ISO insulation panels now to create reliable roof slope.