TRI-BUILT 2.25 in Standard Drill Point Roofing Fasteners #12, 1,000-Count Bucket

This is a bucket of 1,000 TRI-BUILT #12 standard drill point roofing fasteners, 2.25 in long. The longer shank reaches thicker assemblies and heavier substrates, and the standard drill point eliminates pre-drilling. Sold as one bucket weighing about 16 lb.

Key Features:

• Longer reach: 2.25 in length fastens through thicker insulation and into heavier framing.
• Self-drilling point: Standard drill point drives without pre-drilling for faster installation.
• #12 gauge: Standard #12 shank for reliable holding strength.
• Bulk bucket: 1,000 fasteners per bucket supports a full day of production.
• High-wind listed: FM Approved and Miami-Dade County Approved as printed.

Specifications Table:

Fit and Compatibility:

Use where a #12 x 2.25 in self-drilling roofing screw is specified, such as fastening through insulation into steel decks or purlins; verify embedment length per the system manufacturer’s specification. Driven with a screw gun and matching socket (sold separately).

Frequently Asked Questions (FAQ):

Q: How many screws come in the bucket?
A: 1,000 screws per bucket.

Q: What are the dimensions?
A: #12 gauge, 2.25 in long, standard drill point.

Q: When should I choose 2.25 in over a shorter screw?
A: When the total fastened thickness, such as insulation plus panel, requires deeper embedment into the deck or framing.

Q: Are they approved for wind-prone regions?
A: The listing shows FM Approved and Miami-Dade County Approved; confirm against your system specification.

Q: How much does the bucket weigh?
A: About 16 lb per 1,000-count bucket.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Size the fastener so the drill point clears the metal while at least the required embedment reaches the deck; 2.25 in is common for over-insulated metal roofing assemblies. Set the screw gun clutch to avoid overdriving and crushing insulation. Pair with the matching seam-fastener pattern in your roofing system’s specification.

Fastener points are sharp; wear gloves and eye protection when handling and driving screws.

Order the TRI-BUILT #12 standard drill point roofing fasteners, 2.25 in, in a 1,000-count bucket.