TRI-BUILT One Step Foamable Adhesive 1.5 Liter Cartridge

TRI-BUILT One Step Foamable Adhesive comes in a 1.5 liter cartridge and covers approximately 600 sq ft per cartridge. It is an FM Approved foamable bonding adhesive for low-slope roofing applications. One cartridge is the selling unit.

Key Features:

• 600 sq ft coverage: Each 1.5 liter cartridge covers approximately 600 square feet.
• FM Approved: The adhesive carries FM Approved status per the product listing.
• Foamable formula: One Step foamable chemistry is designed for single-component application.
• Cartridge format: Supplied in a 1.5 liter cartridge for use with standard foamable adhesive application equipment.
• Lightweight cartridge: The cartridge weighs about 5 lb, easy to handle on the roof.

Specifications Table:

Coverage & How Much You Need:

One 1.5 liter cartridge covers approximately 600 square feet. Estimate the number of cartridges by dividing your total bonding area by 600 sq ft and rounding up.

Fit and Compatibility:

Designed for use in TRI-BUILT and comparable low-slope roofing assemblies per the manufacturer’s application instructions. Apply with equipment suited to one-step foamable adhesive cartridges.

Frequently Asked Questions (FAQ):

Q: What is included in the order?
A: One 1.5 liter cartridge of TRI-BUILT One Step Foamable Adhesive.

Q: How much area does one cartridge cover?
A: Approximately 600 square feet per cartridge at the specified application rate.

Q: Is this adhesive certified?
A: The listing shows it is FM Approved.

Q: What equipment do I need to apply it?
A: A one-step foamable adhesive applicator gun compatible with 1.5 liter cartridges is required; the gun is sold separately.

Q: How heavy is the cartridge?
A: The cartridge weighs approximately 5 lb.

Expert Verdict Reviewed by the SuperArbor Pro Desk

One-step foamable adhesives are a fast way to adhere insulation boards to decks or to attach base sheets without hot asphalt or torches. Verify the deck type and substrate porosity before application, and follow the manufacturer’s ribbon pattern and rate to achieve the rated 600 sq ft coverage. Store cartridges above manufacturer-recommended temperatures for proper foam development.

Wear gloves and eye protection when applying foamable adhesives and follow the manufacturer’s instructions and FM requirements for the roof assembly.

Order the TRI-BUILT One Step Foamable Adhesive 1.5 liter cartridge for your next low-slope bonding job.