Versico VersiGard EPDM One Part Pourable Sealant, Black, 0.5 Gal Pouch

Versico VersiGard One-Part Pourable Sealant is a black, single-component, moisture-curing elastomeric polyether sealant sold in a 0.5-gal ready-to-use pouch. It forms a flexible, durable, waterproof rubber seal around hard-to-flash penetrations in VersiGard EPDM roofing systems. No mixing is required and the pouch can be resealed with its original cap.

Key Features:

• EPDM compatible: Formulated to be compatible with Versico’s EPDM membranes in VersiGard roofing systems.
• Rapid skin time: Forms a waterproof rubber surface in less than one hour when exposed to atmospheric moisture.
• Deep cure: Moisture curing continues until a two-inch deep solid rubber seal encases the penetration.
• No mixing required: Single-component and ready to use straight from the pouch.
• Resealable pouch: The 0.5-gal pouch can be resealed with its original cap between uses.
• Flexible, durable seal: Provides a flexible, durable and long-lasting seal around hard-to-flash penetrations.

Specifications Table:

Coverage & How Much You Need:

Coverage depends on penetration size and seal depth; the pouch cures to a solid rubber seal up to 2 in. deep around the penetration. Order enough pouches to fill each penetration completely in one pour.

Fit and Compatibility:

Made for VersiGard EPDM roofing systems and compatible with Versico EPDM membranes. Pair with matching Versico flashing accessories; membrane and flashing materials are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included in one order?
A: One 0.5-gal pouch of black Versico VersiGard One-Part Pourable Sealant.

Q: Do I have to mix it?
A: No, it is a single-component, ready-to-use sealant with no mixing required.

Q: How fast does it cure?
A: It skins to a waterproof rubber surface in less than one hour; complete cure continues to a 2-inch depth and varies with humidity and temperature.

Q: What is it used for?
A: It seals hard-to-flash penetrations in VersiGard EPDM commercial roofing systems.

Q: Can I save leftover material?
A: Yes, the pouch can be resealed with its original cap.

Q: Is it compatible with my membrane?
A: It is designed for use with Versico EPDM membranes in VersiGard systems.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Pourable sealant is the go-to fix for irregular or clustered pipe penetrations that are impractical to flash with boots or pitch pockets. Pour it in a single continuous pour so the full depth cures as one solid rubber mass, and verify ambient humidity and temperature allow complete cure before exposing the roof to water. Always confirm the sealant is approved for your specific VersiGard membrane system before use.

Follow the manufacturer’s safety data sheet and roofing safety practices, including fall protection, when working on commercial roofs.

Order Versico VersiGard EPDM One-Part Pourable Sealant in the 0.5-gal resealable pouch today.