Wanhao Water Washable Resin, 500g, Grey | WAN620.

Wanhao water washable UV resin is a high quality resin designed for LCD resin 3D printers with the big advantage that it can be washed off with water instead of alcohol. This resin is usually slightly more expensive than the standard resin, but you do have to spend money on alcohol and work with chemicals which affect your skin.

This resin works with LCD based UV resin printers working at 405nm. Itis designed with a fast curing time, high stability and low shrinkage. The result of this is accurate smooth parts that can be used in a wide variety of applications. This resin is specifically designed for the Wanhao range of 3D printers, but can also be used on other LCDresin printers, like the Anycubic, Creality, Elegoo, Phrozen, Geetech, Nova3D and Sparkmaker 3D printers.

The resin comes in a strongmetalbottle which keeps all light away from the resin and is very wellpackaged.

Specifications:

• Colour: Grey
• Amount: 500g
• Curing frequency: 395 – 420nm
• Operating Temperature:25 – 35
• Shelf life: 12 Months
• Hardness: 75 Shore D
• Liquid Density: 1.0-1.11 g/cm
• Viscosity (@25): 250-350cP

Storage instructions:

1. Keep away from light.(Sunshine contains a lot of UV light, itwill solidify photosensitive resin).
2. It is recommended to store at 15 – 35 ambient temperature, the lower the temperature, the higher the viscosity of the resin.Keep resin sealedduringstorage.Excessive dust or moisture can affect print quality.

Usage instructions:

1. Shake well before use, some resins do contain sediment which will sag to the bottom of the container.
2. Wear gloves during use to avoid direct contact withskin and keep the room wellventilated.
3. In anevent ofcontact with skin, rinse with runningwater. If you feel unwell, seek medical attention.
4. Printed models need tobe cleaned with ahigh-concentration alcohol (IPA)to clean the printed part forabout 30s (recommended concentration of 95% or more, the higher the better). Water washable resins can be washed off with water.
5. Do not pour the resin into the resin vatwhich contains unusedresin. The resin in the vatcan be dirty and pollute the new resin.
6. Donot leave the resin in the resin vat for a longperiod oftime without use to avoid resin pollution affecting the printingquality. Rather pour the cleanunused resin into a light blocking container.Resin has a shelf life of up to 18months