Western Colloid 850 Seamless Walkway Coating, Burnt Yellow, 5 Gallon Pail

This is Western Colloid 850 Seamless Walkway Coating in Burnt Yellow, supplied as a 5-gallon pail. It is an acrylic coating that creates a seamless, slip-resistant walkway surface on roofs and decks. Apply with compatible roller or squeegee equipment as part of a Western Colloid coating system.

Key Features:

• Seamless finish: Forms a continuous, seamless walkway surface without seams or laps.
• Acrylic chemistry: Acrylic-based coating formulated for pedestrian traffic surfaces.
• Burnt Yellow color: Supplied in Burnt Yellow to delineate walkway paths on the roof.
• 5-gallon pail: Packaged in a 5-gallon pail for convenient handling and mixing.
• Walkway safety: Intended to define and protect roof walkways from foot traffic.

Specifications Table:

Coverage & How Much You Need:

Coverage depends on the manufacturer’s application rate, substrate and number of coats, which are not stated in the listing; consult Western Colloid’s technical data for spread rate per gallon before ordering.

Fit and Compatibility:

Designed for use within Western Colloid coating systems; confirm substrate compatibility and any required base coat, fabric reinforcement or primer with the manufacturer. Application tools are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included with one order?
A: One 5-gallon pail of Western Colloid 850 Seamless Walkway Coating in Burnt Yellow.

Q: What is it made of?
A: The 850 walkway coating is an acrylic-based coating product.

Q: How much area does a pail cover?
A: Coverage per gallon is not stated in the listing; refer to the manufacturer’s technical data sheet for the spread rate at the recommended film thickness.

Q: Where is it applied?
A: It is used to create seamless pedestrian walkway surfaces, typically on roofs and decks.

Q: Why is it yellow?
A: Burnt Yellow is the supplied color, which helps visually mark and delineate walkway paths from the surrounding roof surface.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Walkway coatings do two jobs at once: they protect the membrane underneath from traffic and they channel foot traffic along a defined path. Verify the substrate is compatible with an acrylic coating and confirm the manufacturer’s spread rate before estimating pails, since multiple coats may be specified. Apply in the temperature and moisture window the manufacturer allows.

Allow the coating to cure fully per the manufacturer’s instructions before allowing foot traffic, and use appropriate personal protective equipment during application.

Order the Western Colloid 850 Seamless Walkway Coating pail to protect and define your roof walkways.