GenFlex EZ TPO Bonding Adhesive, 5 Gallon Pail, Yellow Solvent-Based Contact Adhesive

GenFlex EZ TPO Bonding Adhesive is a solvent-based contact adhesive supplied in a 5 gallon yellow pail, sold as one pail. It is designed specifically for bonding GenFlex EZ TPO membranes to approved insulations, as well as wood, metal, masonry and other acceptable substrates. Pair it with GenFlex EZ TPO membrane and standard roller application for full membrane adhesion.

Key Features:

• Solvent-based bond: A solvent-based contact adhesive formulated specifically for GenFlex EZ TPO membranes.
• Versatile substrates: Bonds TPO to approved insulations, wood, metal, masonry and other acceptable substrates.
• Reliable coverage: Coverage of 45-60 sq ft per gallon, depending on the substrate.
• 5 gallon pail: Supplied in a 5 gallon pail, roughly 225-300 sq ft of coverage per pail.
• Controlled storage: Store in original unopened containers at 60-80 F until ready for use.

Specifications Table:

Coverage & How Much You Need:

At 45-60 sq ft per gallon, a 5 gallon pail covers roughly 225-300 sq ft of membrane bonding, depending on the substrate and application technique. Apply evenly to both membrane and substrate for a proper contact bond.

Fit and Compatibility:

Formulated specifically for GenFlex EZ TPO membranes on approved insulations and acceptable substrates such as wood, metal and masonry. Membrane, insulation and application rollers are sold separately.

Frequently Asked Questions (FAQ):

Q: What is included?
A: One 5 gallon pail of GenFlex EZ TPO Bonding Adhesive in yellow.

Q: How much area does one pail cover?
A: Approximately 225-300 sq ft at the stated 45-60 sq ft per gallon rate, depending on the substrate.

Q: What can I bond with it?
A: GenFlex EZ TPO membranes to approved insulations, wood, metal, masonry and other acceptable substrates.

Q: How should it be stored?
A: In original unopened containers at 60-80 F until ready for use.

Q: Is it water-based?
A: No, it is a solvent-based contact adhesive designed for TPO membrane bonding.

Expert Verdict Reviewed by the SuperArbor Pro Desk

Contact adhesive requires applying an even coat to both the membrane and substrate, then waiting for proper flash-off before mating the surfaces for a strong, permanent bond. Roll the membrane immediately after mating to ensure full contact. Because it is solvent-based, plan for ventilation and check jobsite VOC restrictions; GenFlex offers low-VOC alternatives where needed.

Solvent-based adhesive is flammable and produces vapors; use in well-ventilated areas, keep away from ignition sources, and follow the safety data sheet and jobsite VOC rules.

Order the GenFlex EZ TPO Bonding Adhesive 5 gallon pail for your next TPO membrane install.